TAK.BW-14
Plaque arrière en métal, montage mural
Plaque arrière en métal pour montage mural, pour MS-60, MS-100 & TX-103.
Plaque arrière en métal pour montage mural, pour MS-60, MS-100 & TX-103.
Détecteur IRP quad sensor avec résistances intégrées, à lentille dure, discrimination animale jusqu’à 24kg, p: 10 x 10m, a: 85°, c: 13mA, support mural / plafond fourni.
Boîte de jonction pour DC-D4531WERX, DC-D4511WERX, blanc, dimensions: 135×56mm.
Boîte de jonction pour DC-D4531WERX, DC-D4511WERX, blanc, dimensions: 135×79mm.
Boîte de jonction pour série DC-D1000, dimensions: 155×33mm.
Détecteur plafond 360° IRP, détection: diamètre 12m / hauteur 2,4~4m, alimentation: 9~16VDC.
Détecteur MW + IRP avec résistances intégrées, lentille dure, p: 15 x 15m, a: 85°, c: 30mA, support mural / plafond fourni.
Chauffage pour barrages IRA doubles et quadruples, t: 12-24VDC, c: 250mA, par paire.
Single Port Ethernet Surge Protector, RJ45 In-Line, Supports IEEE 802.3af & at PoE.
Chauffage à installer dans boîtier, 3,5W/12V – 5W/24V à 0°C, par paire.
Détecteur MW + IRP + AM avec résistances intégrées, lentille dure, p: 15 x 15m, a: 85°, c: 30mA, support mural / plafond fourni.
Détecteur beam réfléchissant, intérieur, 5m, signal d'alarme : sortie relais 30V 0.5A, alimentation : 10.5 à 26VDC, consommation : 37mA.
Détecteur extérieur double IRP, jour/nuit, 4 plans de détection, sortie d’alarme: relais NO/C/NF, p: 10m (wide angle) – 20m (long range), t: 10,5-30VDC, c: 30mA.
Barrage IRA double pour extérieur, 1 canal, p: 30m (60m intérieur), t: 12-28VDC, c: 55mA (beampairing), par set de 2.
Barrage IRA double pour extérieur, 1 canal, p: 60m (120m intérieur), t: 12-28VDC, c: 55mA (beampairing), par set de 2.
Barrage IRA double pour extérieur, 1canal, p: 100m (200m intérieur), t: 12-28VDC, c: 55mA (beampairing), par set de 2.
Détecteur extérieur double IRP, 1 plan de détection configurable, IP43, p: 2x12m – 2x90°, t: 12-30VDC, c: 40mA.
Dôme Direct CX, IR, 1/2,8", 1080p, objectif fixe: 3,6mm, vision de nuit: 20m, WDR, métal, alimentation: 12VDC.
Barrage IRA double pour extérieur, 1canal, p: 20m (40m intérieur), t: 12-28VDC, c: 55mA (beampairing), par set de 2.
Barrage IRA double pour extérieur, 1canal, p: 40m, t: 12-30VDC, c: 75mA (beampairing), par set de 2.
Détecteur beam réfléchissant, intérieur / extérieur, max, 15m, signal d'alarme : sortie relais 30V 0.5A, alimentation : 10.5 à 30VDC, consommation : 55mA.
Caméra bullet Direct CX, antivandale, IR, 1/2,8", 1080p, objectif fixe: 3,6mm, vision de nuit: 10m, WDR, IP66, métal, alimentation:12VDC.
Barrage IRA double pour extérieur, 1 canal, p: 60m, t: 12-30VDC, c: 80mA (beampairing), par set de 2.
Détecteur extérieur double IRP, AND/OR, fonction jour/nuit, 1 plan de détection configurable, IP43, p: 2x12m – 2x90°, t: 12-30VDC, c: 40mA.
Détecteur extérieur double IRP, fonction AND/OR et jour/nuit, 1 plan de détection configurable, IP43, p: 2x12m, a: 2x90°, c: 3V-9VDC, FW-MAGxx ou FW2-MAGxx, batterie non incluse.
1 canal Ethernet sur coax avec pass-through PoE, 10/100Mbps, industrie, mini.
Barrage IRA quadruple synchronisé, 4 canaux, à utiliser avec les tours TAD, TAS ou TAW, p: 50m, t: 12-30VDC, c: 95mA, par set de 2.