Départements
Marque
Technologie
Environnement
Résolution
Objectif
Ports
Couleur
Format
Série
Les produits de toutes les marques
Filtres actifs
HIK.DS3E105DO
Switch 5 ports 10/100mbps
Switch 5 ports, 5 x 10/100mbps autosensing, PVC, dimensions: 22×83×52mm, alimentation: 5VDC.
- Nouveau
HIK.DS3E0108DO
Switch 8 ports 10/100mbps
Switch 8 ports, 8 x 10/100mbps autosensing, PVC, dimensions: 22×124×52mm, alimentation: 5VDC.
- Nouveau
MOR.M200-SMB KO
Boîte de montage pour série MI
Boîte de montage avec knock-outs pour modules adressables série MI, avec caoutchouc, dimensions: 139×134×40
ETC.PCB-503
Universele relaisprint
Module relais universel, type de sortie : 2 x contact sec NO/NC, charge maximale : 8~30VAC, 11~30VDC, dimensions 30 x 50 x 67 mm.
- En promo
HIK.DS3E0508DE
Switch Gigabit 8 ports
Switch 8 ports, 10/100/1000mbps autosensing, dimensions: 23×90×142mm.
AJF.LINEPROTEC
Module de protection
Module de protection contre les courts-circuits et le sabotage, Fibra, sans boîtier.
EVW.SWITCH8P
Switch 8 ports, 10/100/1000mbps
Switch 8 ports, 10/100/1000mbps autosensing, dimensions: 90×142×23mm.
MOR.020-713
Carte relais pour centrales HRZx
Carte relais pour centrales HRZx, alarme + défaut, 1 sortie d’alarme, 1 sortie defaut
HIK.DSPM1O1LWE
Carte relais programmables
Carte avec relais programmables, AX PRO, indication LED, contact NO/NF, alimentation: 7~24VDC, blanc, dimensions: 38x25x18mm.
AJD.WALLSWITCH-B
Carte avec sortie programmables
Carte avec sortie programmable, Baseline, sortie: 110~240VAC 13A, alimentation: 110~240VAC.
AJD.RELAY
Carte relais programmables
Carte avec relais programmables, Baseline, contact NO/NF, alimentation: 7~24VDC.
HIK.DSPM1O1HWE
Carte avec sortie programmables
Carte avec sortie programmable, AX PRO, indication LED, contact NO/NF 110~240VAC 13A, alimentation: 110~240VAC, blanc, dimensions: 38x25x18mm.
CMN.CLESP
Single Port Ethernet Surge Protector
Single Port Ethernet Surge Protector, RJ45 In-Line, Supports IEEE 802.3af & at PoE.
AJF.LINESPLIT
Module pour diviser 1 bus en 4 bus
Module pour diviser 1 bus en 4 bus, Fibra, sans boîtier.
HIK.DS3WF0FC2O
Bridge, extérieur, 40°, 1 km, 12VDC/ PoE
Bridge, extérieur, mode de fonctionement: wireless bridge, distance de transmission sans fil jusqu'à 1 km, angle de l'antenne: 40°, 2 ports 10/100mbps LAN, alimentation: 12VDC / PoE (via injecteur fourni), dimensions: 92x187x58mm.
- Nouveau
ETC.C.10-V
Module vocal pr C.10
Module vocal 8 messages pour C.10, temps d'enregistrement: 2'25", programmable par ligne téléphonique extérieure.
HIK.DS3E1105PEI
Switch 5 ports dont 4 ports PoE
Switch 5 ports dont 4 ports PoE, 10/100mbps autosensing, PoE max. 65W, dimensions: 27,6×83,1×105mm.
AJF.MULTIRELAY
Module relais, quatre canaux
Module relais, Baseline, quatre canaux avec contacts libres de potentiel, Fibra, sans boîtier.
HIK.DS3E1106PEI
Switch 6 ports, 3 PoE + 1 Hi-PoE
Switch 6 ports dont 3 ports PoE + 1 ports Hi-PoE, 6 x 10/100mbps autosensing, PoE max. 60W, dimensions: 25,6×68,5×145mm, alimentation: 48VDC.
- Nouveau
HIK.DSPT1WE
Lecteur de badges, bidirect., blanc
Lecteur de badges, sans fil bidirectionnelle, AX PRO, blanc, avec 3 piles type AA, dimensions: 75x124x21mm.
SD3.ETC05-B
Module 1 entrée / 1 sortie adressable
Module 1 entrée / 1 sortie adressable, isolateur intégré, en boîtier (rail DIN sur demande),
MOR.MI-DISO
Isolateur court circuit
Isolateur court circuit, excl. boîtier, dimensions : 94×93×23mm , pour centrales DXC et ZXS
HIK.DS2CE56D8TVPITE
Dôme HDTVI, PoC, 2MP, EXIR, fix: 2,8mm
Dôme antivandale HDTVI, PoC, EXIR, 1/2,7", 2MP, objectif fixe: 2,8mm, vision de nuit: 20m, IP67, WDR, métal, réglable sur 3 axes, alimentation: 12VDC/PoC.
MOR.MI-DMMI
Module d'entrée adressable, 1entrée sup.
Module d’entrée adressable, 1 entrée supervisée, dimensions : 94×93×23mm, pour centrales DXC et ZXS
HIK.DS2CE57H8TVPIT28
Dôme HDTVI, 5MP, EXIR, IP67,fix 2,8mm
Dôme antivandale HDTVI, EXIR, 1/3", 5MP, objectif fixe: 2,8mm, vision de nuit: 20m, IP67, WDR, métal, réglable sur 3 axes, alimentation: 12VDC.
HIK.DS3WF0FA2NO
Bridge, extérieur, 70°, 1 km, 12VDC/ PoE
Bridge, extérieur, mode de fonctionement: wireless bridge, distance de transmission sans fil jusqu'à 1 km, angle de l'antenne: 70°, 2 ports 10/100mbps LAN, alimentation: 12VDC / PoE (via injecteur fourni), dimensions: 92x187x58mm.
- Nouveau
CRO.RU-SP
Appareil de program. pour RU-VB DTMF
Appareil de programmation pour module vocal RU-VB DTMF.
HIK.DS3E1505PEI
Switch 5 ports dont 4 ports PoE
Switch 5 ports dont 4 ports PoE, 4 x 10/100mbps PoE + 1 x 10/100/1000mbps autosensing, PoE max. 60W, dimensions: 27,6×83,1×121,1mm, alimentation: 54VDC.
- Nouveau
HIK.DSPSP1WE
Prise controlée bidirect., blanc
Prise controlée sans fil bidirectionnel, AX PRO, blanc.
DAH.PFS30054ET60V2
Switch 5 ports: 4 PoE
Switch 5 ports: 3 ports PoE + 1 ports Hi-PoE + 1 ports gigabit, longue distance (250m), 10/100mbps autosensing, PoE max. 60W, dimensions: 130×85×26mm.
HIW.HWID120HA2.8
HiWatch, dôme IP, 2MP,1/2,9",PoE 12VDC
HiWatch, dôme IP antivandale, IR, 1/2,9", 2MP, H265+, objectif fixe: 2,8mm, détection des personnes et des véhicules, vision de nuit: 30m, WDR, IP67, métal + PVC, alimentation: PoE, 12VDC.
- Nouveau
HIW.HWID121H
HiWatch, dôme IP, 2MP, 1/2,8" PoE 12VDC
HiWatch, dôme IP antivandale, IR, 1/2,8", 2MP, H265+, objectif fixe 2,8mm, vision de nuit: 30m, WDR, IP67, métal + PVC, alimentation: 12VDC, PoE.
HIK.DS3E1506PEI
Switch 6 ports dont 4 ports PoE
Switch 6 ports dont 4 ports PoE, 4 x 10/100mbps PoE + 2 x 10/100/1000mbps autosensing, PoE max. 60W, dimensions: 27,6×83,1×121,1mm, alimentation: 54VDC.
- Nouveau
DAH.PFS30064ET60V2
Switch 6 ports: 4 PoE
Switch 6 ports: 3 ports PoE + 1 port Hi-PoE + 2 ports, longue distance (250m), 10/100mbps autosensing, PoE max. 60W, dimensions: 130×85×26mm.
MOR.MI-DCMO
Module de sortie adress., 1 contact libr
Module de sortie adressable, 1 contact libre potentiel , pour centrales DXC et ZXS
CRO.SH-IO 2X2-8F
Module 2 entrées et 2 relais
Module sans fil bidirectionnel, 2 entrées et 2 relais, pour centrale SHEPHERD, alimentation: 5~12VDC ou 2 pilles CR123A 3V, dimensions: 128x70x27mm.
ETC.C.10-OD
Carte extension 10 sorties OD pour C.10
Carte d' extension 10 sorties OD 150mA pour C.10, doit être ajoutée à une C.10-I.